Tilletia horrida glycoside hydrolase family 128 protein, designated ThGhd_7, modulates plant immunity by blocking reactive oxygen species production.

Tilletia horrida is an important soilborne fungal pathogen that causes rice kernel smut worldwide. We found a glycoside hydrolase family 128 protein, designated ThGhd_7, caused cell death in Nicotiana benthamiana leaves. The predicted signal peptide (SP) of ThGhd_7 targets it for secretion. However, loss of the SP did not affect its ability to induce cell death. The 23-201 amino acid sequence of ThGhd_7 was sufficient to trigger cell death in N. benthamiana. ThGhd_7 expression was induced and upregulated during T. horrida infection. ThGhd_7 localised to both the cytoplasm and nucleus of plant cells, and nuclear localisation was required to induce cell death. The ability of ThGhd_7 to trigger cell death in N. benthamiana depends on RAR1 (required for Mla12 resistance), SGT1 (suppressor of G2 allele of Skp1), and BAK1/SERK3 (somatic embryogenesis receptor-like kinase 3). Heterologous overexpression of ThGhd_7 in rice reduced reactive oxygen species (ROS) production and enhanced susceptibility to T. horrida. Further research revealed that ThGhd_7 interacted with and destabilised OsSGT1, which is required for ROS production and is a positive regulator of rice resistance to T. horrida. Taken together, these findings suggest that T. horrida employs ThGhd_7 to disrupt ROS production and thereby promote infection.

Efficacies of anlotinib monotherapy versus gemcitabine-based chemotherapy for patients with advanced soft tissue sarcoma after the failure of anthracycline-based chemotherapy.

OBJECTIVE: The purpose of this study was to compare the antitumor efficacy of anlotinib with gemcitabine-based chemotherapy as subsequent treatment regimens in patients with advanced non-specific soft tissue sarcoma (STS) after the failure of anthracycline-based chemotherapy. METHODS: Patients diagnosed with advanced STS who were treated with either anlotinib or gemcitabine-based chemotherapy between May 2009 and May 2023 in our center were eligible. All patients experienced disease progression or recurrence after the anthracycline-based chemotherapy. The primary endpoint was progression-free survival (PFS). Secondary endpoints were disease control rate (DCR), overall survival (OS) and safety. RESULTS: We included 49 patients receiving anlotinib and 45 patients receiving gemcitabine-based chemotherapy. The median follow-up time was 76.9 weeks (range 2.9-678.9 weeks). The DCR (65.3% vs. 57.8%; p = 0.610), PFS (24.0 weeks vs. 18.6 weeks; p = 0.669) and OS (79.4 weeks vs. 87.0 weeks; p = 0.471) of anlotinib and gemcitabine-based chemotherapy indicated similar clinical efficacy. Moreover, exploratory subgroup analyses showed that patients with STS originating from limbs and trunk were inclined to benefit from anlotinib treatment (median PFS: 31.3 weeks vs. 12.4 weeks; p = 0.045). ECOG PS was an independent predictor of the PFS [Hazard Ratio (HR) 0.31; 95% confidence interval (CI) 0.11-0.85; p = 0.023] and OS (HR 0.26, 95%CI 0.10-0.70; p = 0.008) in the anlotinib group. While neutrophil-to-lymphocyte ratio (NLR) was an independent prognostic factor of the PFS (HR 0.33, 95%CI 0.11-0.98; p = 0.045) in the gemcitabine-based chemotherapy group. The incidence of grade 3 or higher related AEs in anlotinib and gemcitabine-based chemotherapy was 20.4% (n = 10) and 20.0% (n = 9), respectively. CONCLUSION: Our research suggested that anlotinib and gemcitabine-based chemotherapy showed similar clinical efficacy and safety in the subsequent treatment of advanced STS after the failure of anthracycline-based chemotherapy.

Mitochondrial-targeting effector RsIA_CtaG/Cox11 in Rhizoctonia solani AG-1 IA has two functions: plant immunity suppression and cell death induction mediated by a rice cytochrome c oxidase subunit.

Rhizoctonia solani AG-1 IA causes a necrotrophic rice disease and is a serious threat to rice production. To date, only a few effectors have been characterized in AG-1 IA. We previously identified RsIA_CtaG/Cox11 and showed that infiltration of the recombinant protein into rice leaves caused disease-like symptoms. In the present study, we further characterized the functionality of RsIA_CtaG/Cox11. RsIA_CtaG/Cox11 is an alternative transcript of cytochrome c oxidase copper chaperone Cox11 that starts from the second AUG codon, but contains a functional secretion signal peptide. RNA interference with RsIA_CtaG/Cox11 reduced the pathogenicity of AG-1 IA towards rice and Nicotiana benthamiana without affecting its fitness or mycelial morphology. Transient expression of the RsIA_CtaG/Cox11-GFP fusion protein demonstrated the localization of RsIA_CtaG/Cox11 to mitochondria. Agro-infiltration of RsIA_CtaG/Cox11 into N. benthamiana leaves inhibited cell death by BAX and INF1. In contrast to rice, agro-infiltration of RsIA_CtaG/Cox11 did not induce cell death in N. benthamiana. However, cell death was observed when it was coinfiltrated with Os_CoxVIIa, which encodes a subunit of cytochrome c oxidase. Os_CoxVIIa appeared to interact with RsIA_CtaG/Cox11. The cell death triggered by coexpression of RsIA_CtaG/Cox11 and Os_CoxVIIa is independent of the leucine-rich repeat receptor kinases BAK1/SOBIR1 and enhanced the susceptibility of N. benthamiana to AG-1 IA. Two of the three evolutionarily conserved cysteine residues at positions 25 and 126 of RsIA_CtaG/Cox11 were essential for its immunosuppressive activity, but not for cell death induction. This report suggests that RsIA_CtaG/Cox11 appears to have a dual role in immunosuppression and cell death induction during pathogenesis.

Nanocurcumin attenuates pyroptosis and inflammation through inhibiting NF-κB/GSDMD signal in high altitude-associated acute liver injury.

Exposure to a hypobaric hypoxic environment at high altitudes can lead to liver injury, and mounting evidence indicates that pyroptosis and inflammation play important roles in liver injury. Curcumin (Cur) can inhibit pyroptosis and inflammation. Therefore, our purpose here was to clarify the mechanism underlying the protective effect of nanocurcumin (Ncur) and Cur in a rat model of high altitude-associated acute liver injury. Eighty healthy rats were selected and exposed to different altitudes (6000 or 7000 m) for 0, 24, 48, or 72 h. Fifty normal healthy rats were divided into normal control, high-altitude control, salidroside (40 mg/kg [Sal-40]), Cur (200 mg/kg [Cur-200]), and Ncur (25 mg/kg [Ncur-25]) groups and exposed to a high-altitude hypobaric hypoxic environment (48 h, 7000 m). Serum-liver enzyme activities (alanine transaminase, aspartate transaminase, and lactate dehydrogenase were detected and histopathology of liver injury was evaluated by hematoxylin and eosin staining, and inflammatory factors were detected in liver tissues by enzyme-linked immunosorbent assays. Pyroptosis-associated proteins (gasdermin D, gasdermin D N-terminal [GSDMD-N], pro-Caspase-1, and cleaved-Caspase-1 [cleaved-Casp1]) and inflammation-associated proteins (nuclear factor-κB [NF-κB], phospho-NF-κB [P-NF-κB], and high-mobility group protein B1 [HMGB1]) levels were analyzed by immunoblotting. Ncur and Cur inhibited increased serum-liver enzyme activities, alleviated liver injury in rats caused by high-altitude hypobaric hypoxic exposure, and downregulated inflammatory factors, including tumor necrosis factor-α, interleukin (IL)-1ß, IL-6, and IL-18, in rat liver tissues. The level of P-NF-κB, GSDMD-N, cleaved-Casp1, and HMGB1 in rat liver tissues increased significantly after high-altitude exposure. Ncur and Cur downregulated P-NF-κB, GSDMD-N, cleaved-Casp-1, and HMGB1. Ncur and Cur may inhibit inflammatory responses and pyroptosis in a rat model of high altitude-associated acute liver injury.

Polymyxin B-Modified Fosfomycin Liposomes Target Gram-Negative Bacteria and Exert Synergistic Antibacterial Effect.

Bacterial infection has always been one of the most serious threats faced by humans. Bacterial targeting is a promising strategy to enhance treatment efficacy and reduce the emergence of drug resistance. However, the traditional antibiotic targeting efficiency is poor, and it is challenging to achieve therapeutic concentrations of both drugs simultaneously in the same tissue due to differences in drug metabolism. This study aims to construct bacteria-targeted liposomes to enhance antibiotic delivery. In this study, anionic liposomes were constructed using the thin-film dispersion method, and the cationic antimicrobial peptide polymyxin B (PMB) was adsorbed onto the liposome surface through anionic-cationic electrostatic interaction as a carrier for fosfomycin (FOS), enabling bacteria-targeted drug delivery. The targeted effect of polymyxin B liposomes (PMB-Lipo) on Acinetobacter baumannii was evaluated in vitro and in vivo. The bactericidal activity of polymyxin B adsorbed fosfomycin liposomes (PMB-FOS-Lipo) in vitro and in vivo was compared with PMB and FOS mixture solution (PMB-FOS-Solution), and the anti-infection and anti-inflammatory effects were assessed. We also explored the issue of PMB nephrotoxicity using a series of biochemical indicators in mice. In vitro and in vivo experiments showed that PMB-Lipo effectively targeted Acinetobacter baumannii. PMB-FOS-Lipo exhibited better therapeutic efficacy compared to free PMB and FOS. Finally, adsorbing polymyxin B onto the liposome surface significantly reduced its severe nephrotoxicity. PMB-Lipo can effectively target Acinetobacter baumannii, and the encapsulated fosfomycin in liposomes synergizes with polymyxin B, enhancing antibacterial efficacy and reducing adverse drug reactions. We believe this antibacterial strategy can provide new insights into bacteria-targeted treatment.

The Evaluation and Exploration of Piezoelectric Parameter Optimization for Droplet Ejection in Binder Jet 3D Printing Drugs.

Since the first three-dimensional (3D) printed drug was approved by the Food and Drug Administration in 2015, there has been a growing interest in using binder jet 3D printing (BJ-3DP) technology for pharmaceuticals. However, most studies are still at an exploratory stage, lacking micromechanism research, such as the droplet ejection mechanism, the effect of printhead piezoelectric parameters on inkjet smoothness and preparation formability. In this study, based on the inkjet printing and observation platform, the Epson I3200-A1 piezoelectric printhead matched to the self-developed BJ-3DP was selected to analyze the droplet ejection state of self-developed ink at the microlevel with different piezoelectric pulse parameters. The results showed that there was a stable inkjet state with an inkjet pulse width of 3.5 µs, an ink supply pulse width of 4.5 µs, and a jet frequency in the range of 5000-19,000 Hz, ensuring both better droplet pattern and print accuracy, as well as high ejection efficiency. In conclusion, we performed a systematic evaluation of the inkjet behavior under different piezoelectric pulse parameters and provided a good idea and case study for the optimization of printhead piezoelectric parameters when BJ-3DP technology was used in pharmaceuticals.

Quantitative multiphoton imaging of cell metabolism, stromal fibers, and keratinization enables label-free discrimination of esophageal squamous cell carcinoma.

Esophageal squamous cell carcinoma (ESCC) features atypical clinical manifestations and a low 5-year survival rate (< 5% in many developing countries where most of the disease occurs). Precise ESCC detection and grading toward timely and effective intervention are therefore crucial. In this study, we propose a multidimensional, slicing-free, and label-free histopathological evaluation method based on multispectral multiphoton fluorescence lifetime imaging microscopy (MM-FLIM) for precise ESCC identification. To assess the feasibility of this method, comparative imaging on fresh human biopsy specimens of different ESCC grades is performed. By constructing fluorescence spectrum- and lifetime-coded images, ESCC-induced morphological variations are unveiled. Further quantification of cell metabolism and stromal fibers reveals potential indicators for ESCC detection and grading. The specific identification of keratin pearls provides additional support for the early detection of ESCC. These findings demonstrate the viability of using MM-FLIM and the series of derived indicators for histopathological evaluation of ESCC. As there is an increasing interest in developing multiphoton endoscopes and multiphoton FLIM systems for clinical use, the proposed method would probably allow noninvasive, label-free, and multidimensional histological detection and grading of ESCC in the future.

Antitumor synergism between PAK4 silencing and immunogenic phototherapy of engineered extracellular vesicles.

Immunotherapy has revolutionized the landscape of cancer treatment. However, single immunotherapy only works well in a small subset of patients. Combined immunotherapy with antitumor synergism holds considerable potential to boost the therapeutic outcome. Nevertheless, the synergistic, additive or antagonistic antitumor effects of combined immunotherapies have been rarely explored. Herein, we established a novel combined cancer treatment modality by synergizing p21-activated kinase 4 (PAK4) silencing with immunogenic phototherapy in engineered extracellular vesicles (EVs) that were fabricated by coating M1 macrophage-derived EVs on the surface of the nano-complex cores assembled with siRNA against PAK4 and a photoactivatable polyethyleneimine. The engineered EVs induced potent PAK4 silencing and robust immunogenic phototherapy, thus contributing to effective antitumor effects in vitro and in vivo. Moreover, the antitumor synergism of the combined treatment was quantitatively determined by the CompuSyn method. The combination index (CI) and isobologram results confirmed that there was an antitumor synergism for the combined treatment. Furthermore, the dose reduction index (DRI) showed favorable dose reduction, revealing lower toxicity and higher biocompatibility of the engineered EVs. Collectively, the study presents a synergistically potentiated cancer treatment modality by combining PAK4 silencing with immunogenic phototherapy in engineered EVs, which is promising for boosting the therapeutic outcome of cancer immunotherapy.

Defense Strategies of Rice in Response to the Attack of the Herbivorous Insect, Chilo suppressalis.

Chilo suppressalis is a notorious pest that attacks rice, feeding throughout the entire growth period of rice and posing a serious threat to rice production worldwide. Due to the boring behavior and overlapping generations of C. suppressalis, the pest is difficult to control. Moreover, no rice variety with high resistance to the striped stem borer (SSB) has been found in the available rice germplasm, which also poses a challenge to controlling the SSB. At present, chemical control is widely used in agricultural production to manage the problem, but its effect is limited and it also pollutes the environment. Therefore, developing genetic resistance is the only way to avoid the use of chemical insecticides. This article primarily focuses on the research status of the induced defense of rice against the SSB from the perspective of immunity, in which plant hormones (such as jasmonic acid and ethylene) and mitogen-activated protein kinases (MAPKs) play an important role in the immune response of rice to the SSB. The article also reviews progress in using transgenic technology to study the relationship between rice and the SSB as well as exploring the resistance genes. Lastly, the article discusses prospects for future research on rice's resistance to the SSB.

Safety, Pharmacokinetics, and Pharmacodynamics of Midazolam Gel After Rectal Administration in Healthy Chinese Subjects.

BACKGROUND AND OBJECTIVES: Midazolam rectal gel is a novel rectal formulation that may be a promising and potential alternative to oral administration for pediatric sedation. The objective of this study was to evaluate the safety, pharmacokinetics, pharmacodynamics, and absolute bioavailability of midazolam rectal gel in healthy Chinese subjects. METHODS: An open-label, single-dose, randomized, two-period, two-treatment, crossover clinical study was conducted in 22 healthy subjects (16 males and six females), each receiving 2.5 mg intravenous midazolam in one period and 5 mg midazolam rectal gel in another period (the dosages here were calculated as active midazolam). Safety, pharmacokinetic, and pharmacodynamic assessments were conducted throughout the study. RESULTS: All of the subjects completed both treatment periods. The formulation of rectal gel was well tolerated, with no serious adverse events occurring. After a single rectal dose of 5 mg midazolam rectal gel, it was absorbed rapidly with a median value of time to peak concentration (Tmax) of 1.00 h, and mean values of the peak concentration (Cmax) and area under the concentration-time curve (AUC0-t) of 37.2 ng/mL and 137 h·ng/mL, respectively. The absolute bioavailability of rectal gel was 59.7%. The rectal gel exhibited a relatively delayed onset but a more stable sedative effect and a longer duration when compared with intravenous midazolam. CONCLUSION: Midazolam rectal gel may be a feasible alternative with a high level of acceptance in pediatric sedation and enhanced bioavailability compared to an oral formulation. The modeling results may help to disclose out the exposure-response relationship of midazolam rectal gel and support the design of an escalating-doses study and pediatric extrapolation study. CLINICAL TRIAL REGISTRATION: The study was registered at http://www.chinadrugtrials.org.cn (No. CTR20192350).

3D Printing Technology Based on Versatile Gelatin-Carrageenan Gel System for Drug Formulations.

Currently, there is a shortage of pediatric medicines on the market, and 3D printing technology can more flexibly produce personalized medicines to meet individual needs. The study developed a child-friendly composite gel ink (carrageenan-gelatin), created 3D models by computer-aided design technology, then produced personalized medicines using 3D printing to improve the safety and accuracy of medication for pediatric patients. An in-depth understanding of the printability of different formulations was obtained by analyzing the rheological and textural properties of different gel inks and observing the microstructure of different gel inks, which guided the formulation optimization. Through formulation optimization, the printability and thermal stability of gel ink were improved, and F6 formulation (carrageenan: 0.65%; gelatin: 12%) was selected as the 3D printing inks. Additionally, a personalized dose linear model was established with the F6 formulation for the production of 3D printed personalized tablets. Moreover, the dissolution tests showed that the 3D printed tablets were able to dissolve more than 85% within 30 min and had similar dissolution profiles to the commercially available tablets. This study demonstrates that 3D printing is an effective manufacturing technique that allows for flexible, rapid, and automated production of personalized formulations.

Methods and Characteristics of Drug Extraction from Ion-Exchange-Resin-Mediated Preparations: Influences, Thermodynamics, and Kinetics.

Since the discovery of ion-exchange resins, they have been used in many fields, including pharmacy. Ion-exchange resin-mediated preparations can realize a series of functions, such as taste masking and regulating release. However, it is very difficult to extract the drug completely from the drug-resin complex because of the specific combination of the drug and resin. In this study, methylphenidate hydrochloride extended-release chewable tablets compounded by methylphenidate hydrochloride and ion-exchange resin were selected for a drug extraction study. The efficiency of drug extraction by dissociating with the addition of counterions was found to be higher than other physical extraction methods. Then, the factors affecting the dissociation process were studied to completely extract the drug from the methylphenidate hydrochloride extended-release chewable tablets. Furthermore, the thermodynamic and kinetic study of the dissociation process showed that the dissociation process obeys the second-order kinetic process, and it is nonspontaneous, entropy-decreasing, and endothermic. Meanwhile, the reaction rate was confirmed by the Boyd model, and the film diffusion and matrix diffusion were both shown to be rate-limiting steps. In conclusion, this study aims to provide technological and theoretical support for establishing a quality assessment and control system of ion-exchange resin-mediated preparations, promoting the applications of ion-exchange resins in the field of drug preparation.

Self-Boosting Vaccination Based on Pulsatile Antigen Release from Core-Shell Microparticles.

Vaccination is among the most effective ways to prevent infectious diseases. Subunit vaccines are safe but usually require multiple booster shots, which may lead to immunity loss and economic consume. In this study, a self-boosting vaccine is developed based on the pulsatile release of antigen from the core-shell microparticle after single-injection immunization. Self-healing technology applied to form an "antigen core" can avoid organic solvents from destroying the spatial structure of the antigen. The "antigen shell" is built-up by self-assemble of the antigen with the opposite charged polypeptide. Primary immunization occurs with the self-assembled film disintegration, and the booster comes with the microparticle degradation. The changing of antigen-specific antibodies after immunization with the core-shell microparticle vaccine is consistent with that caused by the two shots of immunization. The immune effect and safety evaluation results support the translational potential of this self-boosting core-shell microparticle vaccine.

A Review of 3D Printing Technology in Pharmaceutics: Technology and Applications, Now and Future.

Three-dimensional printing technology, also called additive manufacturing technology, is used to prepare personalized 3D-printed drugs through computer-aided model design. In recent years, the use of 3D printing technology in the pharmaceutical field has become increasingly sophisticated. In addition to the successful commercialization of Spritam® in 2015, there has been a succession of Triastek's 3D-printed drug applications that have received investigational new drug (IND) approval from the Food and Drug Administration (FDA). Compared with traditional drug preparation processes, 3D printing technology has significant advantages in personalized drug manufacturing, allowing easy manufacturing of preparations with complex structures or drug release behaviors and rapid manufacturing of small batches of drugs. This review summaries the mechanisms of the most commonly used 3D printing technologies, describes their characteristics, advantages, disadvantages, and applications in the pharmaceutical industry, analyzes the progress of global commercialization of 3D printed drugs and their problems and challenges, reflects the development trends of the 3D printed drug industry, and guides researchers engaged in 3D printed drugs.

Exosome-Based Carrier for RNA Delivery: Progress and Challenges.

In the last few decades, RNA-based drugs have emerged as a promising candidate to specifically target and modulate disease-relevant genes to cure genetic defects. The key to applying RNA therapy in clinical trials is developing safe and effective delivery systems. Exosomes have been exploited as a promising vehicle for drug delivery due to their nanoscale size, high stability, high biocompatibility, and low immunogenicity. We reviewed and summarized the progress in the strategy and application of exosome-mediated RNA therapy. The challenges of exosomes as a carrier for RNA drug delivery are also elucidated in this article. RNA molecules can be loaded into exosomes and then delivered to targeted cells or tissues via various biochemical or physical approaches. So far, exosome-mediated RNA therapy has shown potential in the treatment of cancer, central nervous system disorders, COVID-19, and other diseases. To further exploit the potential of exosomes for RNA delivery, more efforts should be made to overcome both technological and logistic problems.

Overcoming Pharmaceutical Bottlenecks for Nucleic Acid Drug Development.

The outbreak of the coronavirus disease 2019 (COVID-19) pandemic and swift approval of two mRNA vaccines have put nucleic acid therapeutics in the spotlight of both the scientific community and the general public. Actually, in addition to mRNAs, multiple nucleic acid therapeutics have been successively commercialized over the past few years. The rapid development of nucleic acid drugs not only demonstrates their superior potency but also marks a new era of the field. Compared with conventional treatments targeting proteins rather than the root causes of diseases at the genetic level, nucleic acids are capable of achieving long-standing or even curative effects against undruggable disorders by modulating gene expression via inhibition, editing, addition, or replacement. This offers a terrific arsenal for expanding therapeutic access to diseases lacking current treatment options and developing vaccines to provide swift responses to emerging global health threats.Despite the stunning success and recent resurgence of interest in the field, the unfavorable physicochemical characteristics (i.e., the negative charge, large molecular weight, and hydrophilicity), susceptibility to nuclease degradation, off-target toxicity, and immunogenicity are a brake for moving nucleic acid therapeutics from bench to bedside. Currently, developing technologies to improve the circulation stability, targeting affinity, cellular entry, endolysosomal escape, efficacy, and safety of nucleic acid drugs still remains a major pharmaceutical bottleneck.In this Account, we outline the research efforts from our group on the development of technology platforms to overcome the pharmaceutical bottlenecks for nucleic acid therapeutics. We have engineered a variety of intelligent delivery platforms such as synthetic nanomaterials (i.e., lipid nanoparticles, polymers, and inorganic nanoparticles), physical delivery methods (i.e., electroporation), and naturally derived vehicles (i.e., extracellular vesicles), aiming at endowing nucleic acids with improved circulation stability, targeting affinity, and cellular internalization (Get in) and stimuli responsive endolysosomal escape capability (Get out). Moreover, we will discuss our progress in developing a series of modification strategies for sequence engineering of nucleic acids to endow them with enhanced nuclease resistance, translation efficiency, and potency while alleviating their off-target toxicity and immunogenicity (Sequence engineering). Integrating these technologies may promote the development of nucleic acid therapeutics with potent efficacy and improved safety (Efficacy & safety). With this Account, we hope to offer insights into rational design of cutting-edge nucleic acid therapeutic platforms. We believe that the continuing advances in nucleic acid technologies together with academic-industry collaborations in the clinic, will promise to usher in more clinically translatable nucleic acid therapeutics in the foreseeable future.

A small secreted protein, RsMf8HN, in Rhizoctonia solani triggers plant immune response, which interacts with rice OsHIPP28.

The necrotrophic phytopathogen Rhizoctonia solani (R. solani) causes disease in many plant species. This fungal genome encodes abundant small cysteine-rich (SCR)-secreted proteins in R. solani that may induce pathogenesis. To test their molecular functions, we introduced 10 SCR-secreted protein genes from R. solani into tobacco leaves via agroinfiltration. Consequently, we identified RsMf8HN, a novel SCR protein that triggers cell death and an oxidative burst in tobacco. RsMf8HN comprises 182 amino acids (aa), including a signal peptide (SP) of 17aa, and the protein has unique features: it is orthologous to an allergen protein Mal f 8 occurring in Malassezia species, and possesses a high glycine and serine content. RsMf8HN is coded in a genomic location along with its paralogues and a few other effector candidates. The elicitation of plant immunity by RsMf8HN was dependent on HSP90 and SGT1. RsMf8HN was translocated to multiple locations within the host cells: i.e., nuclei, chloroplasts, and plasma membranes. We confirmed the occurrence of in vivo cross-interactions of RsMf8HN with a rice molecule, the heavy metal-associated isoprenylated plant protein OsHIPP28, which is a protein related to the disease susceptibility factor Pi21. In summary, our results suggest that RsMf8HN is a potential effector that enables necrotrophic phytopathogens to interfere with host plant immunity.

Red-light receptor phytochrome B inhibits BZR1-NAC028-CAD8B signaling to negatively regulate rice resistance to sheath blight.

Phytochrome (Phy)-regulated light signalling plays important roles in plant growth, development, and stress responses. However, its function in rice defence against sheath blight disease (ShB) remains unclear. Here, we found that PhyB mutation or shade treatment promoted rice resistance to ShB, while resistance was reduced by PhyB overexpression. Further analysis showed that PhyB interacts with phytochrome-interacting factor-like 15 (PIL15), brassinazole resistant 1 (BZR1), and vascular plant one-zinc-finger 2 (VOZ2). Plants overexpressing PIL15 were more susceptible to ShB in contrast to bzr1-D-overexpressing plants compared with the wild-type, suggesting that PhyB may inhibit BZR1 to negatively regulate rice resistance to ShB. Although BZR1 is known to regulate brassinosteroid (BR) signalling, the observation that BR signalling negatively regulated resistance to ShB indicated an independent role for BZR1 in controlling rice resistance. It was also found that the BZR1 ligand NAC028 positively regulated resistance to ShB. RNA sequencing showed that cinnamyl alcohol dehydrogenase 8B (CAD8B), involved in lignin biosynthesis was upregulated in both bzr1-D- and NAC028-overexpressing plants compared with the wild-type. Yeast-one hybrid, ChIP, and transactivation assays demonstrated that BZR1 and NAC028 activate CAD8B directly. Taken together, the analyses demonstrated that PhyB-mediated light signalling inhibits the BZR1-NAC028-CAD8B pathway to regulate rice resistance to ShB.

The Application and Challenge of Binder Jet 3D Printing Technology in Pharmaceutical Manufacturing.

Three-dimensional (3D) printing is an additive manufacturing technique that creates objects under computer control. Owing to the rapid advancement of science and technology, 3D printing technology has been widely utilized in processing and manufacturing but rarely used in the pharmaceutical field. The first commercial form of Spritam® immediate-release tablet was approved by FDA in 2015, which promoted the advancement of 3D printing technology in pharmaceutical development. Three-dimensional printing technology is able to meet individual treatment demands with customized size, shape, and release rate, which overcomes the difficulties of traditional pharmaceutical technology. This paper intends to discuss the critical process parameters of binder jet 3D printing technology, list its application in pharmaceutical manufacturing in recent years, summarize the still-open questions, and demonstrate its great potential in the pharmaceutical industry.